News




Pyrodynamics has successfully installed and Commissioned Four VIC-3D Systems at IIT Roorkee – Dept of Earthquake Engineering.

The Systems have been configured for measurement on Large Concrete Structures and For Seismic Studies Application.

Each VIC-3D system is configured with 2.3 MP, 155 Fps Cameras.

Additionally One Vic-3D System has been configured with Four Nos of 8.9 MP, 40 fps Cameras for Static / Quasi Static Strain Measurement.

All Four Systems are Hardware Triggered for capturing the images simultaneously.

Data obtained from Mulitple Systems have been Merged with a Single Co Ordinate System.

VIC-3D system installed at Dhofar University – Salalah – Sultanate of Oman.


VIC-3D High Speed Digital Image Correlation System successfully installed at Defence Metallurgical Research Laboratory (DMRL) at Hyderabad.

S.Raviprakash making a Presentation at the International Digital Image Correlation Society Conference held at Columbia – USA from 3-5 Nov 2015.

ISNT AWARD:-

Technical Paper:- “Failure Analysis of Reinforce Concrete Structures using Acoustic Emission and 3D Digital Image Correlation techniques” authored by Dr.R.Vidyasagar, Dr R.K.Singh and S.Raviprakash has been selected as ISNT-IXAR Best Paper Award.

The award will be presented at the inaugural function of NDE 2015 to be held at Hyderabad on 26th Nov 2015.
 

VIC-3D, 3D Digital Image Correlation System installed at the Following Organisations:-

– ISRO Satellite Centre – Bengaluru.

– National Aerospace Laboratories – Structures Division – Bengaluru. (This is the Second System at NAL)

– Masdar Institute of Science and Technology – Abu Dhabi. (This is the First VIC-3D System to be installed in the UAE).

 
INTERNATIONAL DIGITAL IMAGE CORRELATION CONFERENCE & WORKSHOP – DUBLIN, IRELAND – 16th TO 18th SEPT 2014.

Correlated Solutions Inc U.S.A and isi-sys GmbH is organizing the First International Digital Image Correlation Conference & Workshop at Dublin, Ireland – 16th to 18th Sept 2014.

CONFERENCE BROCHURE

Speakers from India:-

1. Dr.S.R.Viswamurthy – National Aerospace Laboratories – Bengaluru.

Technical Paper:- Buckling & Post-buckling Behavior of Thin Composite Panels.

2. Mr.S.Raviprakash – Pyrodynamics – Bengaluru.

Technical Paper:- Full Field Strain Measurement of a reinforced concrete structure and damaged assessment using acoustic emission.

TECHNOLOGY DEVELOPMENT BOARD – DEPARTMENT OF SCIENCE AND TECHNOLOGY AWARD

We are happy to announce that PYRODYNAMICS  has been selected for the very prestigious TECHNOLOGY DEVELOPMENT BOARD – DEPARTMENT OF SCIENCE AND TECHNOLOGY , Technology Award  .

The Award is for Successful Indigenisation of  SCAD 508 – 8 Channel  Strain Measurement System

Mr.S.Raviprakash – MD & CEO –Pyrodynamics will receive the Award on behalf of Pyrodynamics from the Honourable President of India His Excellency  Shri Pranab Mukherjee at a function to be held at Vigyan Bhavan – New Delhi on 11th may 2013 .

OPE 2013 – Kalpakkam

Pyrodynamics will be having a Booth at the ” International Conference & Exhibition on Pressure Vessels and Piping” (OPE 2013) to be held from February 13 – 16, 2013 at Radisson Blu Resort Temple Bay, Mamallapuram, Tamil Nadu, India

SCAD 508 Strain Measurement System , SCAD 500 System and VIC-3D – 3D Digital Image Correlation System will be on Display at the Booth.

23 Jan 2013:- Mr.S.Raviprakash – MD & CEO Pyrodynamics  delivered a Guest Lecture on” Strain Gage Technology “At  INSARM – Indian National Society for Aerospace and Related Mechanisms – Venue – ISRO Satellite Centre – Bengaluru.

Mr.S.Raviprakash – MD & CEO receiving a Plaque on behalf of Pyrodynamics , from

Dr.Rashid Al Leem – Director General, Hamriyah Free Zone Authority, Government of Sharjah.

2 Jan 2013:- Pyrodynamics has installed and Commissioned Two Nos of SCAD 508 – Strain Measurement System at BHEL –Hyderabad.

The SCAD 508 System was integrated with a 1 MHZ USB Data Acquisition System and Dasylab Software

PYRODYNAMICS WISHES ALL OF YOU A VERY HAPPY AND PROSPEROUS NEW YEAR

13th Dec 2012:- Pyrodynamics has installed and Commissioned SCAD 508 – Strain Measurement System at GE-John Welch Technology Centre – Bengaluru.

9 Nov 2012:- Pyrodynamics has installed and Commissioned VIC-2D, 2D Digital Image Correlation System for Full Field Displacement and Strain Measurement at Indian Institute of Technology – Chennai.

 

The System is configured for Fatigue Measurements.

 

A Technical Note Can be downloaded from the Technical Notes Menu.

 

8  Oct  2012:- Pyrodynamics was the “Silver Sponsor” of the Indo – Danish Workshop on Future Composite Technologies For Wind Tunnel Blades on 8th and 9th Oct 2012 Organised by Applied Mechanics Department – Indian Institute Of Technology – New Delhi

 

20 September 2012:- Pyrodynamics has installed and Commissioned SCAD 508 – Strain Measurement System at BHEL –Hyderabad.

Trial Tests were successfully carried out by a Team of Engineers from BHEL and Pyrodynamics at 2400 MW Tehri Hydro Power Complex – Koteswar – Uttaranchal.

14 Sept 2012:- Pyrodynamics has installed and Commissioned VIC-3D, 3D Digital Image Correlation System for Full Field Displacement and Strain Measurement at National Aerospace Laboratories – Bengaluru.

3 Sept 2012:- Pyrodynamics has installed and Commissioned VIC-3D, 3D Digital Image Correlation System for Full Field Displacement and Strain Measurement at MRF Tyres Limited–India.

18 Jan 2012:- Pyrodynamics has installed and Commissioned the following Systems at General Motors Technical Centre –India.

 VIC-3D, 3D Digital Image Correlation System for Full Field Displacement and Strain Measurement.

VIC-2D-HS, 2D High Speed Digital Image Correlation System for Full Field Displacement and Strain Measurement.

17 Dec 2011:- Pyrodynamics has installed and Commissioned VIC-3D-HS, 3D High Speed Digital Image Correlation System for Full Field Displacement & Strain Measurement And Modal Analysis at Indian Institute of Technology – New Delhi.

An application Note can be downloaded from the “Technical Notes – Digital Image Correlation” Menu.

20 November 2011:- Pyrodynamics has installed and Commissioned VIC-3D, 3D Digital Image Correlation System for Full Field Displacement and Strain Measurement at GEITC – GE John Welch Technology Centre  – Bengaluru.

SCAD 500 SYSTEM AT SENSOR+TEST SHOW 2010 -GERMANY

SCAD 500 Strain Measurement System Was displayed at the SENSOR+TEST 2010 Show at Nurnberg Germanyfrom 18th to 20th May 2010 at the booth of our Technical Representatives in European Union Peekel Instruments B.V. Netherlands

This was the first Strain Measurement System manufactured in Indiato be displayed at any Prestigious Trade Show in Europe.

The SCAD 500 attracted quite a lot of interest and attention from several Researchers and Engineers